Providing stable and reliable feed production line solutions for customers around the world
Products Center
1. The body is made of 3 mm steel plate; 2. The body features a cleaning door and quick-connect fittings for upper mounting.
1. Octagonal counterflow cooling ensures uniform particle cooling without cracking; the cooling time and filling amount are adjustable, and discharge is smooth with no residue left behind. 2. The slide-valve discharge mechanism operates smoothly and reliably, ensuring a fluent discharge process. 3. The temperature of the cooled particles is 3–5℃ lower than room temperature.
1. The machine trough adopts a unique W-shaped structure—narrow at the opening, large in the middle, and narrow at the bottom—resulting in a distinctive and aesthetically pleasing design. It occupies a small footprint, minimizes residue, and allows the rotor to be pulled out from one end for easy maintenance, ensuring thorough mixing with no dead corners. 2. It offers high mixing uniformity, eliminates dead corners during mixing, and features a short mixing cycle. Typically, each batch of material can be uniformly mixed within 40 to 90 seconds, with a coefficient of variation below 5%. 3. The machine is equipped with an oil-addition pipe, enabling large volumes of liquid additives to be added; several liquids can be added in appropriate amounts as needed.
1. Coefficient of variation ≤ 10%; 2. Mixing time: 5–10 minutes (users need to perform tests; mixing time may vary slightly depending on the materials used); 3. Compact design with low power consumption, small footprint, and large mixing capacity; 4. Suitable for mixing materials with good flowability.
Single-axis dual-ring belt mixer
1. The cylinder’s cross-section is fully circular, resulting in high utilization of the mixing space, minimal residue on the cylinder walls, and no dead zones in the mixing process. 2. The machine body is designed with one end fixed and the other end movable. The rotor can be pulled out from one end, making maintenance convenient. 3. Coefficient of variation ≤ 7%.
1. Single-axis, double-layer impeller design with a coefficient of variation ≤ 5%; 2. Fully open discharge gate, with material residue ≤ 2‰; 3. Mixing time is approximately 45–120 seconds (users should perform testing; mixing time may vary slightly depending on the material); 4. Equipped with a self-locking pneumatic discharge mechanism—once the air supply is cut off, the discharge gate will remain closed and no material will leak.
1. A manually operated trapezoidal screw is used to adjust the height of the sewing machine, accommodating customers’ varying packaging specifications. 2. We use well-known domestic sewing machines. 3. An automatic thread-cutting function is available as an optional feature.
1. The feeding rate is adjusted via frequency conversion, allowing the feeding speed to be freely regulated according to the crusher’s load, thereby improving crushing efficiency and reducing energy consumption. 2. An optional current negative feedback controller can be configured to automatically adjust the feeding speed based on the crusher’s load, ensuring high efficiency and energy savings for the crusher. 3. High-strength permanent magnets with a magnetic induction intensity ≥ 3000 GS, achieving an iron removal efficiency of 99.99%.
1. The feeding rate is adjusted via frequency conversion, allowing the feeding speed to be freely regulated according to the crusher’s load, thereby improving crushing efficiency and reducing energy consumption. 2. An optional current negative feedback controller can be configured to automatically adjust the feeding speed based on the crusher’s load, ensuring high efficiency and energy savings for the crusher. 3. High-strength permanent magnets with a magnetic induction intensity ≥ 3000 GS, achieving an iron removal efficiency of 99.99%.
1. The uniquely designed “U”-shaped secondary crushing structure effectively alters the material’s trajectory, increasing production by 20% compared to other models. By adjusting the gap between the hammers and screen, both coarse and fine crushing can be achieved. 2. Equipped with a high-precision dynamically balanced rotor and optimally arranged hammer blades, this machine delivers unprecedented micro-crushing performance. It features SKF bearings and bearing housings for smoother and more reliable operation. 3. The casing undergoes aging or tempering treatment to ensure it remains free from welding-induced deformation during long-term operation. The fully open access door and safety interlock system make operation and maintenance even simpler.
1. Direct-drive motor transmission, featuring low noise and high efficiency; 2. Special press-roll structure allows for easy maintenance and replacement of the roll base; 3. The iron-removal device at the feed inlet has an integrated structure consisting of six magnets, offering high iron-removal efficiency and quick, convenient cleaning.
1. The shaft-end labyrinth seal prevents material leakage, and the bearing is isolated from the end plate to avoid damage caused by material ingress into the bearing. 2. The 3mm-thick blades are durable, do not cause machine blockage, and have low energy consumption.
1. The tail-wheel features a drum-type cage structure, reducing breakage rates and belt material adhesion. 2. An explosion-proof vent is installed to prevent dust explosions, ensuring safety and reliability. 3. The base of the machine is equipped with a stainless steel arc-shaped bottom, which is wear-resistant, long-lasting, and easy to clean for material removal. 4. The bearings are completely sealed against material ingress.
1. The head wheel features a drum-shaped rubber-covered roller, which is wear-resistant and automatically self-aligning. 2. An explosion-proof vent is installed to prevent dust explosions, ensuring safety and reliability. 3. The base of the machine is equipped with a stainless steel arc-shaped bottom, which is wear-resistant, long-lasting, and easy to clean for material removal. 4. The bearings are completely sealed against material ingress.
1. The shaft-end seal prevents material leakage, and the bearing is isolated from the end plate to avoid damage caused by material entering the bearing. 2. The 3mm-thick wear-resistant blades are durable, do not cause machine blockage, and have low energy consumption. 3. The discharge port only discharges material and does not allow air to enter. It is primarily used for horizontal conveying in negative-pressure pulverizers.
Mob/Whatsapp/Wechat
Address
Middle of Wuyuan Road, Xiwu County Industrial Clustering Zone, Jiaozuo City, China
Follow Us
We prioritize your convenience by providing tailored solutions and expert support at every step.
Free solution proposals
You Will Receive:
One-on-one consultation with a product advisor
Detailed assistance from our expert team
Free solution proposals
Email:consider44@gmail.com
WhatsApp:+86-13017511866
Tel:+86-13017511866
Add: Middle of Wuyuan Road, Xiwu County Industrial Clustering Zone, Jiaozuo City, China
We Welcome Your Inquiries
Please provide a brief description of your needs or questions below, and our team will get back to you within two business days.