Providing stable and reliable feed production line solutions for customers around the world
Products Center
1. This equipment can distribute materials to multiple locations; 2. It offers reliable and accurate positioning, simple operation, and convenient installation and maintenance; 3. The equipment is equipped with inspection doors for easy daily maintenance, servicing, and repairs; 4. The transmission system uses a direct-coupled reducer, featuring a compact structure and smooth rotation of the guiding material-feeding bend pipe.
1. Both the housing and end covers are equipped with reinforcing ribs, ensuring high rigidity of the casing and preventing deformation of the casing. 2. The impeller has no end plates at either end, allowing the impeller’s end faces to come into direct contact with the inner end faces of the housing. As a result, the impeller acts like a scraper, effectively removing the material. This design eliminates the previous issue of material entering the gap between the impeller and the end cover, which used to cause blockages and contamination of the bearings. 3. The inlet and outlet ports are fitted with adjustable ventilation channels, creating negative pressure at the pelletizer’s discharge port and thereby preventing the escape of steam and dust.
1. Uses a double-acting cylinder for smooth, reliable, and durable pneumatic transmission; 2. Has excellent sealing performance; 3. Suitable for environments where the temperature is above 0℃.
1. The tail-wheel features a drum-type cage structure, reducing breakage rates and belt material adhesion. 2. An explosion-proof vent is installed to prevent dust explosions, ensuring safety and reliability. 3. The base of the machine is equipped with a stainless steel arc-shaped bottom, which is wear-resistant, long-lasting, and easy to clean for material removal. 4. The bearings are completely sealed against material ingress.
1. The head wheel features a drum-shaped rubber-covered roller, which is wear-resistant and automatically self-aligning. 2. An explosion-proof vent is installed to prevent dust explosions, ensuring safety and reliability. 3. The base of the machine is equipped with a stainless steel arc-shaped bottom, which is wear-resistant, long-lasting, and easy to clean for material removal. 4. The bearings are completely sealed against material ingress.
1. The shaft-end seal prevents material leakage, and the bearing is isolated from the end plate to avoid damage caused by material entering the bearing. 2. The 3mm-thick wear-resistant blades are durable, do not cause machine blockage, and have low energy consumption. 3. The discharge port only discharges material and does not allow air to enter. It is primarily used for horizontal conveying in negative-pressure pulverizers.
1. The entire machine is equipped with stall detection and a material blockage sensor at the discharge port. In case of a malfunction, the machine will promptly stop and trigger an alarm, ensuring safety and reliability. 2. The shaft end uses a packing seal to ensure no material leakage. 3. The feed inlet is fitted with a feed adjustment device, allowing the feed rate to be adjusted.
1. The head pulley features a plug-in rubber roller, and the machine’s discharge port is equipped with an operator’s access opening. The tensioning device on the machine base uses either gravity-based tensioning or screw-type tensioning; the tail pulley adopts a rat-tail structure. This design minimizes breakage rates to the greatest extent possible, and the sides of the machine cylinder are fitted with overlapping edges. 2. The hopper is made of lightweight, high-strength plastic. The machine cylinder for maintenance purposes features a large-opening, quick-release design and is equipped with an observation glass window. 3. Hard-toothed surface reducer and national standard motor.
1. Advantages such as minimal residue, low noise, and long service life; 2. Mechanical protection against overloading and other conditions, reducing mechanical failures; 3. Simple structure, excellent sealing performance, rational process layout, and low power consumption;
Cooling granules is a critical step in the granulation process. The counterflow cooler series can cool granules—discharged from the granulator at temperatures ranging from 70°C to 90°C—to 3°C to 5°C above room temperature and reduce their moisture content to a safe level (≤12.5%), thereby facilitating the transportation and storage of the granules.
Mob/Whatsapp/Wechat
Address
Middle of Wuyuan Road, Xiwu County Industrial Clustering Zone, Jiaozuo City, China
Follow Us
We prioritize your convenience by providing tailored solutions and expert support at every step.
Free solution proposals
You Will Receive:
One-on-one consultation with a product advisor
Detailed assistance from our expert team
Free solution proposals
Email:consider44@gmail.com
WhatsApp:+86-13017511866
Tel:+86-13017511866
Add: Middle of Wuyuan Road, Xiwu County Industrial Clustering Zone, Jiaozuo City, China
We Welcome Your Inquiries
Please provide a brief description of your needs or questions below, and our team will get back to you within two business days.